Data Logging Degaussers

Hard Drive Degaussers

Security Degaussers

Hard Drive Destroyers

Data/Computer Tape Erasers

Tape and Reel Degaussers

Video Tape Degaussers

The Degausser Range

Which Media To Erase

Compare Degaussers

Not sure which Degausser you require ? then Ask The Experts

Solid State Drive Disintegrator (MD-SSD/D)

The MediaDice SSD Disintegrator is a continuous cycle knife mill that disintegrates SSDs at a rate of 360 per hour (average 1 SSD every 10 seconds).

The MD-SSD is compact and portable, and designed for facilities such as data centers that need to destroy large volumes of SSDs on site, before they leave their secure facility. Its footprint is about the size of a small floor-standing photo copier/printer.

The SSDs are fed into the machine manually or via an auto loader, and disintegrated by a powerful knife mill that repeatedly chops the media until it is reduced to particles of 2 mm or less. The disintegrated particles are then vacuumed through a metal screen and into a debris collection bin.

The media feeder of the MD-SSD destroyer accepts SSDs without the need to remove plastic or aluminum casings, or use of any special adapters
Media may be fed manually, one-at-a-time into the MD-SSD, or in batches of up to 25 using the optional auto loader.



Product Specifications

Model MediaDice Solid State Drive Disintegrator (MD-SSD/D)
Machine Weight 350 lbs. – 110 volt model
365 lbs. – 220 volt model
Machine Dimensions 40" H x 30" W x 25" D
Shipping Weight 375 lbs. – 110 volt model
390 lbs. – 220 volt model
Shipping Dimensions 44” x 36” x 31 ” (H x L x W)
Power Requirements (voltage / frequency / current) 220 Volts A.C. ±10%, 50/60 Hz, 7.5 Amps
110 Volts A.C. ±10%, 50/60 Hz, 15 Amps
Factory Configured for any international power supplies
Media that can be put in the disintegrator 1.8” & 2.5” SSD. SIM Card, Flash Card, CAC ID, EMV Credit Card, Magnetic Strip Card, CD, & DVD, Blu Ray, Circuit Boards and Flash Drive.
Full Disintegrating Cycle Time (From loading device until safe ejection and containment of debris) Less than 10 seconds from loading until disintegrated media are safely and automatically ejected into debris bin. No attachments or adapters to install or change. No need to touch or manually remove sharp debris, or to clean the disintegrating chamber after each use.
Media Accepted Dedicated SSD destroyer (no adapters required).
Debris Collection Debris is ejected directly into the included collection bin that holds up to 40 destroyed SSDs
Maintenance/Longevity 100,000 Cycles (discs) MTBF. No blades to be replaced or sharpened.
Technical Support On-call technical support service department; nationwide and international technical
support team that can be deployed if and when repairs or maintenance needed.


Eyecote has been providing equipment and services to the Data Recording, Entertainment and Media Manufacturing industries for more than 30 years.

Eyecote International Limited
Corporate Office
Singleton Court, Monmouth, NP25 5JA. United Kingdom.
Tel: +44 1600 772433

All specifications subject to change without notice